CF MOTO CF1000ATR 2018, Руководство по обслуживанию, Страница: 11 / 365

01 Maintenance Information
01-7
●Wheel (Front and Rear)
Item Standard Service limit
Wheel Jump Axial
0.8mm 2.0mm
Radial 0.8mm 2.0mm
Tire
Groove deepness - 3.0mm
Pressure 45kPa(0.45kgf/cm2) -
Item Standard Service limit
Front brake Brake disc thickness 5.0mm 4.0mm
Rear brake
Brake pedal freeplay 95 mm ~105 mm -
Brake disc thickness 5.0mm 4.0mm
●Brake
●Battery/ Charger/ Ignition coil
Item Standard
A/C
magneto
Type Magneto 3-phase A/C generator
Output 3-phase A/C output
Resistance of coil(20°C) 0.1Ω~0.3Ω
Resistance of pick-up coil 300Ω~500Ω
Voltage without load (cold engine) >50V(AC),5000r/min
Output power 350W,5000r/min; 460W,5000r/min
Stable voltage 13.5V~15.0V
Peak voltage of pick-up ≥3V,200 r/min
Regulator type 3-phase supply power circuit
Battery
Capacity 12Vdc/30Ah
Voltage between terminals
Fully recharged 14.4V
Not-fully recharged <11.8V
Recharging current/time
Standard 2.7A/5h~10h
Quick 12A/1h
●Ignition equipment
Item Standard
Ignition controller ECU
Sparkplug
Type Resistance control
Model DCPR8E (NGK)
Spark clearance 0.8mm~0.9mm
Spark specification >8mm,100 kPa
Ignition timing BTDC8º 1300r/min
Ignition coil resistance
Primary 0.70Ω
Secondary 6.9kΩ
Peak voltage
Ignition primary >14V
Pulse starter ≥27kV
Start relay coil resistance 3Ω~5Ω
Start auxiliary coil resistance 70Ω~90Ω