CF MOTO CF1000ATR 2018, Руководство по обслуживанию, Страница: 193 / 365

CFMOTO
05-118
Drive Pulley
Drive Pulley Disassembly
Before disassembly, mark the drive
clutch for balance alignment. (See picture
0511901)
Loosen and remove the shaft nut, remove
the washer, and seperate the drive pulley.
(See picture 0511701)
Remove the Thrust collar and clutch shoe.
Remove the Nylon slider from the Thrust
collar.
Drive Pulley Inspection
Clutch Shoe Inspection
Check clutch shoes for wear and other
damage. Replace all the clutch shoes if
trouble is suspected.
Note: Clutch shoes must be replaced as
a set. Do not replace individual shoes.
Slider Inspection
Check slider wear and other damages.
Replace if necesary. (Recommend: replace
all 3 sliders at the same time)
Adjusting Washer Thickness Inspection
Use vernier calipers to measuere the
adjusting washer thickness. If the value
is less than 1.75mm , replace the washer
and adjust the thickness again.
Adjusting washer (new) thickness:
1.90mm~2.00mm
Drive Pulley Moving and Stable Plate
Inspection.
Inspect the drive surface. If it has wearing
or damage, Replace the parts.
1 Drive Surface on
Stable Pulley
2 Drive Surface on
Moving Pulley
Adjusting Washer Thickness Measuring
0511802
0511803
1
2
1 Clutch Shoe 2 Nylon
slider 3 Thrust collar
0511801
1
3
2