CF MOTO CF1000ATR 2018, Руководство по обслуживанию, Страница: 211 / 365

CFMOTO
05-136
Oil Pressure Gauge
Adapter Hose
(P/N:0JWA-000000-871-001)
0513601
0513602
Oil Pressure Switch
Oil pressure switch service voltage:
0.6bar±0.1bar(0.6kPa±0.1kPa)
It sends the oil pressure signal to
dashboard. When the engine starts, it
comes into working.
Inspection
Start the engine and do idle running, if the
oil pressure warning indicator goes off on
dashboard, it is normal. If the indicator is
still on, then make trouble-shooting.
- Inspect oil pressure switch harness for
normal performance.
- Inspect the oil pressure to see if it is
within the pressure value in the table
above.
If the result of the inspections are okay,
then replace the oil pressure switch.
5.5.7 Engine Oil Pressure
The engine oil pressure test should be
done with a warm engine 90 celcius(194 F
) and the recommended engine oil.
Remove engine oil pressure switch.
Install engine oil pressure gauge
(0JWA-000000-871-001) and adapter
hose.
The engine oil pressure should be within
the following values:
Oil pressure 1300r/min 6000r/min
Min 100kPa 500kPa
Normal 200kPa 580kPa
Max 400kPa 700kPa
If the engine oil is out of specifications,
check the points described in Trouble
Shooting section. Remove engine oil
pressure gauge and adapter hose after
tested.
Reinstall the engine oil pressure switch.
Note: To remove adapter hose from
engine oil pressure gauge, use the service
tool.