CF MOTO CF1000ATR 2018, Руководство по обслуживанию, Страница: 171 / 365

CFMOTO
05-96
059602
1 Retainer 3 Reverse Intermediate
Gear
2 Washer 4 Needle Bearing
5 Intermediate Gear Shaft
1 Crankcase LH bearing removing tool
(P/N: 0800-011000-922-001)
2 Ball Bearing 6303
Reverse Intermediate Gear Removal
Note: If reverse intermediate gear and
needle bearing turn freely and smoothly,
and clearance of them is normal, no need
to remove them.
Use retainer plier to remove the retainer.
And remove the washer, reverse
intermediate gear, needle bear-ing and
washer in orders.
Bearing Removal in Crankcase
If necessary, heat crankcase up to 100ºC
(212 F) for easier bearing removal.
Warning: Clean oil outside and inside
crankcase before heating.
Warning: Always support crankcase
properly when bearing is removed.
Crankcase damages may occur if this
procedure is not performed correctly.
To remove ball bearing in crankcase, use a
blind hole bearing puller
Tool:
Crankcase bearing removing tool 0800-
011000-922-001
Bearing 5206 removing tool 0800-012000-
922-001
059601
5
4
3
2
1
2
1