CF MOTO CF1000ATR 2018, Руководство по обслуживанию, Страница: 138 / 365

5.2 Intake Pipe, Cylinder Head and Cylinder Body
05-63
1 Piston of Front Cylinder
2 Mark on Piston Must Show to Intake
Side of Front Cylinder
3 Piston of Rear Cylinder
4 Mark on Piston Must Show to
Exhaust Side of Rear Cylinder
056301
1 Circlip Installer
(P/N:0800-040005-922-001)
056302
Piston Installation
Reverse the removal procedure for
installation.
Pay attention to the following details.
Apply engine oil on the piston pin.
Insert piston pin into piston and connecting
rod.
Note: Make sure the mounting direction
of the piston is correct.
For each cylinder, install piston with the
arrow on piston dome pointing toward the
transmission of the engine. (See picture
056301)
Front cylinder: Arrow on top of piston must
show to intake side.
Rear cylinder: Arrow on top of piston must
show to exhaust side.
Use circlip installer (0800-040005-922-001)
to assemble the NEW piston circlip as per
following procedure.
Warning: Replace removed piston
circlip(s) with new ones every time. Place
a rag on cylinder base to avoid dropping
the circlip inside the engine.
4
2
1
3
1