CF MOTO CF1000ATR 2018, Руководство по обслуживанию, Страница: 223 / 365

CFMOTO
05-148
1
Left
Crankcase
Cover
2 Locking Bolt 3 CPS
4 Flow Hose 5 Wire Clamp
5.6.2 General
Always perform electrical tests before
removing or installing components.
During assembly/installation, use the
torque values and service products as
shown in the exploded view. Clean threads
before applying thread locker.
Warning
Torque wrench tightening specification
must be strictly adhered to. Locking
devices(e.g.: locking tabs, elastic lock
nuts, cotter pins, etc.) must be installed or
replaced with new ones where specified.
If the efficiency of a locking device is
impaired, it must be renewed.
5.6.3 MAG-side Crankcase Cover
Removal
Drain engine oil and coolant. (Refer to
Lubrication System and Cooling System)
Remove the CPS;
Remove Mag-side crankcase cover bolts.
Remove Mag-side crankcase cover.
Inspection and Cleaning
Inspect the Mag-side crankcase cover
for cracks or other damage. Replace it if
necessary.
Inspect the bearing 60/28 to see if it works
well or not. Replace it if necessary.
Tool: Mag-side crankcase bearing 60/28
removing tool (0800-014001-922-003)
Bearing 60/28 presser (CF188-014001-
921-001) Mag-side crankcase cover
bearing pressing tool (0800-014001-921-
002)
0514801
5
4
3
2
1
2
2
2
2
2
2