CF MOTO CF1000ATR 2018, Руководство по обслуживанию, Страница: 333 / 365

06 Vehicle chassis
06-23
Adjusting shim 11 thickness
2.10 2.20 2.30 2.40 2.42
2.44 2.46 2.48 2.50 2.60
2.70 2.80 2.90 3.00
Adjusting washer
thickness (mm)
0.1 0.2 0.3 0.4
0.5 1.0
062301
6.6.4.3 Front gear case assembly and
adjustment
●Front axle drive bevel gear assembly
a. Use suitable adjusting washer on11,
make sure 14 roates smoothly and
clearance less than 0.05mm.
Part 1 tighten torque 50N·m
NOTE: Oil seal, bearing, and spline
must be covered with engine oil.
Part 1 must be covered with thread locker
●Differential assy assembly
NOTE: Cover bearings, differential
gears with oil before assembly.
Use suitable 38 adjusting shims to make
sure the gears in differential can rotate
smoothly. Part 36 differential driven gear
shaft axial clearance is 0.1mm~0.4mm.
Part 37 CV shaft gear axle axial clearance
is 0.1mm~0.4mm.
Cover thread locker on part 39.
Part 39 tighten torque 40N·m
062301