CF MOTO CF1000ATR 2018, Руководство по обслуживанию, Страница: 172 / 365

5.3 Crankcase, Crankshaft and Gears
05-97
059701
1 Shifting Fork Thickness
1 Bearing 2 Inner Rotor Ring
059702
Inspection
Always verify for the following when
inspecting components in crankcase:
-gear teeth damage
-worn or scoured bearing surface
-excessively worn, scoured or bent shift
fork
-excessively worn, scoured or bent shift
fork shaft
-rounded engagament dogs and slots
-excessively worn, scoured parking lock
lever
-worn shift fork engagement pins
-worn shift track on shift drum
-worn or scoured shift fork claw
-worn splines on shafts and gears
-excessively worn and scoured parking
cam
Bearing
Check if bearing turns freely and smoothly.
If any binding or abnormal noise has been
found, replace it with a new one.
Shift Fork/Shaft
Check both shift forks for excessice wear.
Check shift fork claw for bending.
Measure shift fork claw thickness.
Shifting fork (Left, right fork )
New
5.8mm~5.9mm
(0.228in~0.232in)
Service
limit
5.7mm(0.224in)
1
2
1