CF MOTO CF1000ATR 2018, Руководство по обслуживанию, Страница: 156 / 365

5.3 Crankcase, Crankshaft and Gears
05-81
058101
1 Timing Sprokcet (Gear) of Crankshaft
058102
Crankshaft Removal
Refer to Crankcase.
Crankshaft Inspection
Note: Check each bearing journal of
crankshaft for scoring, scuffing, cracks or
other signs of wear.
Note: Replace the crankshaft if the
gears are worn or otherwise damaged.
Warning: Components with less than the
service limit always have to be replaced.
Otherwise servere damage may be caused
to the engine.
Crankshaft Axial Play
Note: Axial play of crankshaft needs
to be measured before splitting the
crankcase.
Use dial gauge to measure crankshaft
axial play at MAG side.
Crankshaft axial play
New
0.150mm~0.540mm
(0.006in~0.021in)
Service
limit
0.64mm(0.025in)
If the clearance is out of standard. The
clearnace plate and crankshaft needs
replaced.(The clearance plate locking
screw must be covered with 243 thread
locker. Tighten torque: 3N·m)
Connecting Rod Big End Axial Play
Using a feeler gauge, measure the distance
between butting face of connecting rods
and crankshaft counterweight. Replace the
crankshaft if out of standard
Connecting Rod Big End Axial Play
New
0.300mm~0.560mm
(0.012in~0.022in)
Service limit 0.8mm(0.031in)
1 Connecting
Rod
2 Crankshaft 3 Gauge
3
2
1
1
1