manualshive.com logo in svg

CF MOTO CF1000ATR 2018, Руководство по обслуживанию, Страница: 329 / 365

Поделиться
Скачать
CF MOTO CF1000ATR 2018 Скачать руководство пользователя страница 329

                                                                06 Vehicle chassis

06-19

6.6.2 Front and Rear gear case removal and installation

Removal: 

Use lifting jack to lift up the vehicle and support on the frame.

Remove the front and rear wheels, suspension arms, CV shafts and other related parts.

Remove 2 mounting bracket bolts 1(See 061901).

Remove the mounting bolts 4 and nuts 6 (See 061901).

Remove front gear case mounting bracket 2 (See 061901).

Remove front gear case mounting sleeve 5 (See 061901).

Remove front gear case 3 (See 061901).

Remove 2 mounting bracket bolts 1 (See 061902).

Remove rear gear case mounting bolts 3 and nuts 5 (See 061902).

Remove rear gear case mounting bracket 2 (See 061902).

Remove rear gear case 4 (See 061902).

Installation:

 Reverse the removal procedures for installation

Front gear case mounting nut (M10×1.25) Torque: 50N·m~60N·m

Rear gear case mounting nut (M10×1.25) Torque: 60N·m~70N·m

061901

061902

Содержание CF1000ATR 2018














































































































































































































































































































































































Отзывы:

Нет отзывов