CF MOTO CF1000ATR 2018, Руководство по обслуживанию, Страница: 157 / 365

CFMOTO
05-82
058201
1 Crankshaft 2 Connecting
Joint Diameter
058202
A Connecting Rod Big End Innerdiameter
058203
Connecting Rod/Piston Pin Clearance
Refer to Intake Manifold, Cylinder Head
and Cylinder.
Connecting Rod Big End Radial Play
Note: Make sure the same marking of
connecting rod to assemble together, do
not mix it and exchange between cylinder
1 and cylinder 2.
Remove connecting rod from crankshaft.
Warning: If remove the connecting rod
bolt, replace the bearing when assemble
back.
Measure the diameter of crankpin and
compare to inside diameter of connecting
rod big end.
Assemble the bearing back like original.
Assemble the connecting rod and follow
the tighten torque on page 5-84 then
measure the big end inner diameter.
Connecting joint diameter
New
43.930mm~43.950mm
(1.7295in~1.7303 in)
Service limit 43.915mm(1.7290 in)
Connecting rod big end inner diameter
Service limit 44.03mm(1.7335 in)
Connecting rod big end axial clearance
Service limit 0.09mm(0.0035 in)
1 Connecting
Rod
2 Plain
Bearing 3
Connecting
Rod Screws
1
3
2
1
A
2