CF MOTO CF1000ATR 2018, Руководство по обслуживанию, Страница: 335 / 365

06 Vehicle chassis
06-25
c. The rack fork and spine should be
pushed to the direction shown (See
062501). It may be necessary to rotate the
input shaft to obtain full engagement.
d. Use the vehicle 4WD motor wire
harness to set the motor to 4WD-LOCK
position.
e. Make sure that step ‘c’ and ‘d’ are
completed, then use 5mm rods to guide
the motor into the correct position as
shown (See Image 062502).
062501
062502