CF MOTO CF1000ATR 2018, Руководство по обслуживанию, Страница: 53 / 365

CFMOTO
03-6
Front Brake Fluid Level
Inspect the fluid level. When the brake
fluid level is lower than (1) (LOWER) line,
inspect the master cylinder, brake hose and
other for leakage.(See picture 030601)
Loosen two screws (2) to remove the fluid
cap. (See picture 030602)
Add DOT 3 or DOT 4 brake fluid until the
level reachess the upper line.
NOTE
· Do not add fluid to a low reservoir without
checking for brake pad wear first.
· Do not allow dust or water into the brake
fluid.
·Use only DOT 3 or DOT 4 brake fluid to
avoid chemical reaction.
·Don't spill brake fluid on plastic or rubber
parts, as it could damage them.
·Turn handlebar to left or right as necessary
to keep the master cylinder level before the
reservoir cap is removed.
Front Brake Disc&Brake Pads
Brake Pad Wear
Inspect brake pads from the marked place.
Replace brake pads if they are worn to
service limit groove.
Braking Pad service limit: 1.5mm
CAUTION:
Pads should be replaced as an assembly.
Brake Disc Inspection & Replacement
Inspect brake disc (3) for excessive wear
or damage. Replace brake disc when its
thickness is less than 4mm.
Braking Disc service limit: 4.0mm
Brake Fluid Replacement
Replace brake fluid every year.
030601
030602
030603
2
Upper line
3
1