ZyXEL Communications SAM1316-22, User Manual

Page: 395 / 464

Chapter 59 DSL Commands
SAM1316-22 User’s Guide
395
This command displays line performance statistics for the current and specified
number of previous 15-minute periods.
An example is shown next.
In the list above, STUC refers to data detected by the STU-C, and STUR refers to
data detected by the STU-R. See
Table 108 on page 394 for an explanation of
these counters.
These counters are also used in the alarm profiles (see Section 59.3 on page 397 ).
59.2.5 DSL Port 1 Day Performance Command
Syntax:
ras> statistics shdsl 1dayperf <portlist>
where
[count <0..96>] =
Specify for which 15-minute interval (0~96) you want
to display performance statistics. 0 is the current 15
minutes.
Figure 230 DSL Port 15 Minute Performance Command Example
ras> statistics shdsl 15mperf 1 3
Port 1 Current 15 Min elapsed time: 187 secs (Link Down)
Current 15 Min PM: STUC STUR
ES: 0 0
SES: 0 0
CRC: 0 0
LOSWS: 0 0
UAS: 0 0
History 15 Min PM-1: STUC STUR
ES: 0 0
SES: 0 0
CRC: 0 0
LOSWS: 0 0
UAS: 0 0
History 15 Min PM-2: STUC STUR
ES: 0 0
SES: 0 0
CRC: 0 0
LOSWS: 0 0
UAS: 0 0
<portlist> =
You can specify a single DSL port <1>, all DSL ports
<*> or a list of DSL ports <1,3,5>. You can also include
a range of ports <1,5,6~8>.