ZyXEL Communications SAM1316-22, User Manual

Page: 376 / 464

Chapter 57 Firmware and Configuration File Maintenance
SAM1316-22 User’s Guide
376
This is a sample from a FTP session to transfer the computer file
firmware.bin
to
the SAM1316-22.
This is a sample from a FTP session to transfer the SAM1316-22’s current
configuration file (including the configuration files of all the SAM1316-22) to the
computer file
config.txt
.
If your FTP client does not allow you to have a destination filename different than
the source, you will need to rename them as the SAM1316-22 only recognizes
“config-0” and “ras”. Be sure you keep unaltered copies of the files for later use.
The following table is a summary. Please note that the internal filename refers to
the filename on the SAM1316-22 and the external filename refers to the filename
not on the SAM1316-22, that is, on your computer, local network or FTP site and
so the name (but not the extension) may vary. After uploading new firmware, use
the sys version command on the SAM1316-22 to confirm that you have uploaded
the correct firmware version.
57.3 Editable Configuration File
The configuration file can be downloaded as a plain-text (ASCII) file. Edits to the
configuration can be made to this file before it is uploaded again to the SAM1316-
22.
Note: You can change the “.dat” file to a “.txt” file and still upload it back to the
SAM1316-22.
Note: Do not upload any invalid files to the SAM1316-22’s configuration file, as it may
permanently damage your SAM1316-22.
Figure 206 FTP Get Configuration File Example
ftp> get config-0 config.txt
Table 106 Filename Conventions
FILE TYPE
INTERNAL
NAME EXTERNAL
NAME
DESCRIPTION
Configuration File
config-0 *.dat
This is the configuration filename for
the SAM1316-22.
Firmware
ras *.bin
This is the Operating System
firmware on the SAM1316-22.