ZyXEL Communications SAM1316-22, User Manual

Page: 386 / 464

Chapter 59 DSL Commands
SAM1316-22 User’s Guide
386
59.1.2 DSL Port Enable Command
Syntax:
ras> shdsl enable <portlist>
where
This command forcibly enables the specified DSL port(s).
59.1.3 DSL Port Disable Command
Syntax:
ras> shdsl disable <portlist>
where
This command forcibly disables the specified DSL port(s).
Note: The factory default of all ports is enabled.
59.1.4 DSL Port Profile Show Command
Syntax:
ras> shdsl profile show [profile]
where
This command displays the specified DSL profile or all DSL profiles if you do not
specify one.
<portlist> =
You can specify a single DSL port <1>, all DSL ports
<*> or a list of DSL ports <1,3,5>. You can also include
a range of ports <1,5,6~8>.
<portlist> =
You can specify a single DSL port <1>, all DSL ports
<*> or a list of DSL ports <1,3,5>. You can also include
a range of ports <1,5,6~8>.
<profile> =
A profile name.