ZyXEL Communications SAM1316-22, User Manual

Page: 216 / 464

Chapter 31 TLS PVC
SAM1316-22 User’s Guide
216
Apply Click this to add or save channel settings on the selected port.
This saves your changes to the SAM1316-22’s volatile memory. The
SAM1316-22 loses these changes if it is turned off or loses power, so
use the Config Save link on the navigation panel to save your
changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to start configuring the screen again.
Show Port Select which DSL port(s) for which to display TLS PVC settings.
Index This field displays the number of the PVC. Click a PVC’s index number
to use the top of the screen to edit the PVC.
Note: At the time of writing, you cannot edit the VPI and VCI. If
you want to change them, add a new PVC with the desired
settings. Then you can delete any unwanted PVCs.
Port This field displays the number of the DSL port on which the PVC is
configured.
VPI/VCI This field displays the Virtual Path Identifier (VPI) and Virtual Circuit
Identifier (VCI). The VPI and VCI identify a channel on this port.
VID This is the VLAN ID assigned to frames received on this channel.
Priority This is the priority value (0 to 7) added to incoming frames without a
(IEEE 802.1p) priority tag.
DS/US VC Profile This shows which VC profile this channel uses for downstream traffic
shaping. The VC profile for upstream policing also displays if the
channel is configured to use one.
Select
Delete
Select the check box in the Select column for an entry, and click
Delete to remove the entry.
Select All Click this to select all entries in the table.
Select None Click this to un-select all entries in the table.
Table 72 TLS PVC (continued)
LABEL DESCRIPTION