ZyXEL Communications SAM1316-22, User Manual

Page: 408 / 464

Chapter 60 Virtual Channel Management
SAM1316-22 User’s Guide
408
Note: Only the member PVCs need to be created on the subscriber’s device.
The following example adds a PVC to a PPVC with VPI 8 and VCI 35 for port 5. The
PVC uses VPI 8 and VCI 36. It sets the DEFVAL profile for downstream traffic
shaping and for upstream traffic policing. It uses priority queue 2.
60.5 PPVC Member Delete Command
Syntax:
ras> shdsl ppvc member delete <portlist> <vpi> <vci> <member vpi> <member
vci>
where
This command removes a PVC from a PPVC.
The following example removes a PVC that uses VPI 8 and VCI 36 from a PPVC
with VPI 8 and VCI 35 for port 5.
Figure 242 PPVC Member Set Command Example
ras> shdsl ppvc member set 5 8 35 8 36 DEFVAL,DEFVAL 2
<portlist> =
The port(s) of the PPVC.
You can specify a single DSL port <1>, all DSL ports
<*> or a list of DSL ports <1,3,5>. You can also include
a range of ports <1,5,6~8>.
<vpi> =
The VPI of the PPVC.
<vci> =
The VCI of the PPVC.
<member vpi> =
The VPI of the individual PVC that you are removing
from the PPVC.
<member vci> =
The VCI of the individual PVC that you are removing
from the PPVC.
Figure 243 PPVC Member Delete Command Example
ras> shdsl ppvc member delete 5 8 35 8 36