ZyXEL Communications SAM1316-22, User Manual

Page: 78 / 464

Chapter 9 User Account
SAM1316-22 User’s Guide
78
The following table describes the labels in this screen.
9.2 Authentication Screen
Use this screen to set up the authentication policies and settings by which
administrators can access the SAM1316-22.
Table 13 User Account
LABEL DESCRIPTION
Authentication Click this to open the Authentication screen. See Section 9.2 on
page 78 .
Enable Select this check box to turn on the administrator account.
Name Enter a user name for the administrator account.
Password Enter a password for the administrator account.
Retype Password
to Confirm Re-enter the administrator account’s password to verify that you have
entered it correctly.
Privilege Select a privilege level to determine which screens the administrator
can use. There is a high, medium or low privilege level for each
command.
Select high to allow the administrator to use all commands including
the lower privilege commands. High privilege commands include
things like creating administrator accounts, restarting the system and
resetting the factory defaults.
Select middle to allow the administrator to use middle or low
privilege commands.
Select low to allow the administrator to use only low privilege
commands. Low privilege commands are read only.
Add Click Add to save your changes to the SAM1316-22’s volatile
memory. The SAM1316-22 loses these changes if it is turned off or
loses power, so use the Config Save link on the navigation panel to
save your changes to the non-volatile memory when you are done
configuring.
Cancel Click Cancel to begin configuring the fields again.
Index This field displays the number of the user account. Click an account’s
index number to use the top of the screen to edit it.
Enable This field displays a “V “ if you have the administrator account turned
on. It displays a “-“ if the administrator account is turned off.
Name This field displays the administrator account’s user name.
Privilege This field displays the administrator account’s access level (high,
middle or low).
Select Select this check box and click the Delete button to remove an
administrator account.
Delete Select an administrator account’s check box and click this button to
remove the administrator account.
Cancel Click Cancel to start configuring the screen afresh.