ZyXEL Communications SAM1316-22, User Manual

Page: 60 / 464

Chapter 6 Home and Port Statistics Screens
SAM1316-22 User’s Guide
60
ENET This field displays the number of the Ethernet port. Click a port
number to display that port’s statistics screen. The
Ethernet Port
Statistics Screen appears. See Section 6.1.1 on page 61 .
Status This field displays whether the Ethernet port is connected (Up) or not
(Down).
Port Name This field displays the name of the Ethernet port.
Media This field displays the type of media that this Ethernet port is using
for a connection. “-“ displays when the port is disabled or not
connected.
Duplex This field displays whether the port is using half or full-duplex
communication. “-“ displays when the port is disabled or not
connected.
Up Time This field shows the total amount of time in hours, minutes and
seconds the port’s connection has been up. “--:--:--“ displays when
the port is disabled or not connected.
The following fields are related to the xDSL ports.
xDSL This identifies the xDSL port. Click a port number to display that
port’s statistics screen. The
DSL Port Statistics Screen appears. See
Section 6.1.2 on page 64 .
Status This field shows whether the port is connected (Up) or not (Down).
Actual Rate This field shows the interface's current bandwidth in kilobits per
second. For interfaces that do not vary in bandwidth or for those
where no accurate estimation can be made, this object should contain
the nominal bandwidth.
Up Time This field shows the total amount of time in hours, minutes and
seconds the port’s connection has been up. “-“ displays when the port
is not connected.
The following fields and buttons apply to the whole screen.
Poll Interval(s)
Set Interval
The text box displays how often (in seconds) this screen refreshes.
You may change the refresh interval by typing a new number in the
text box and then clicking Set Interval.
Stop Click Stop to halt system statistic polling.
Port
Clear Counter
Select a port from the Port drop-down list box and then click Clear
Counter to erase the recorded statistical information for that port.
Reset Click this to set the Poll Interval(s) and Port fields to their default
values and to refresh the screen.
Table 5 Home (continued)
LABEL DESCRIPTION