ZyXEL Communications SAM1316-22, User Manual

Page: 245 / 464

Chapter 38 PVC Upstream Limit
SAM1316-22 User’s Guide
245
Apply Click Apply to save the settings. The settings then display in the
summary table at the bottom of the screen.
Clicking Apply saves your changes to the SAM1316-22’s volatile
memory. The SAM1316-22 loses these changes if it is turned off or
loses power, so use the Config Save link on the navigation panel to
save your changes to the non-volatile memory when you are done
configuring.
Cancel Click Cancel to begin configuring the fields afresh.
Show Port Select a port for which you wish to view information.
Index This field displays the index number for each PVC. Click it to edit the
settings for the maximum upstream transmission rate.
Type This field displays what type of PVC the specified PVC is.
Port This field displays the port number for the specified PVC.
VPI This field displays the Virtual Path Identifier for the specified PVC.
VCI This field displays the Virtual Circuit Identifier for the specified PVC.
Rate This field displays the maximum upstream transmission rate for the
specified PVC. This has no effect, however, unless Enable Rate Limit
is enabled.
Enable Rate Limit This shows “V” when the SAM1316-22 applies a limit on the upstream
transmission rate for the specified PVC. It shows “-” when there is not
limit applied.
Select
Enable
Select the check box in the Select column for an entry, and click
Enable to activate the limit on the upstream transmission rate for the
select PVC(s).
Select
Disable
Select the check box in the Select column for an entry, and click
Disable to deactivate the limit on the upstream transmission rate for
the select PVC(s).
Select All Click All to mark all of the check boxes.
Select None Click None to un-mark all of the check boxes.
Table 91 PVC Upstream Limit (continued)
LABEL DESCRIPTION