ZyXEL Communications SAM1316-22, User Manual

Page: 343 / 464

Chapter 52 IGMP Commands
SAM1316-22 User’s Guide
343
This command configures an IGMP filter profile.
The following example configures an IGMP filter profile named voice with a range
of multicast IP addresses (index 1) from 224.1.1.10 to 224.1.1.44.
52.3.4 IGMP Filter Profile Delete Command
Syntax:
ras> switch igmpfilter profile delete <name>
where
This command removes an IGMP filter profile.
The following example removes the voice IGMP filter profile.
52.3.5 IGMP Filter Profile Show Command
Syntax:
ras> switch igmpfilter profile show [<name>|*]
where
This command displays an IGMP filter profile’s settings.
<endip> =
Type the ending multicast IP address for a range of IP
addresses that you want to belong to the IGMP filter
profile.
If you want to add a single multicast IP address, enter it
in both the Start IP and End IP fields.
Figure 178 IGMP Filter Profile Set Command Example
ras> switch igmpfilter profile set test1 1 224.1.1.10 224.1.1.44
<name> =
The name of an IGMP filter profile.
Figure 179 IGMP Filter Profile Delete Command Example
ras> switch igmpfilter profile delete voice
[<name>|*] =
The name of an IGMP filter profile or all of the IGMP
filter profiles <*>.