ZyXEL Communications SAM1316-22, User Manual

Page: 413 / 464

Chapter 60 Virtual Channel Management
SAM1316-22 User’s Guide
413
Use the following command sequence to configure the SAM1316-22 for this
example set up.
60.7.2 RPVC Gateway Set Command
Syntax:
ras> shdsl rpvc gateway set <gateway ip> <vlan id> [<priority>]
where
This command adds a gateway IP address to use for 2684 routed mode traffic.
The following example has the device use a VLAN ID of 1 and IEEE 802.1p priority
of 3 when sending 2684 routed mode traffic to a gateway at IP address
192.168.10.102.
60.7.3 RPVC Gateway Show Command
Syntax:
ras> shdsl rpvc gateway show
This command displays
the gateway IP addresses that are configured for use with
2684 routed mode traffic.
Figure 248 2684 Routed Mode Commands Example
ras> shdsl rpvc gateway set 192.168.10.102 1
ras> shdsl rpvc set 1 8 35 DEFVAL 192.168.10.200/32 192.168.10.102
ras> shdsl rpvc route set 1 8 35 10.10.10.1/24
<gateway ip> =
The IP address of the gateway to which you want to
send the traffic that the system receives from this PVC.
Enter the IP address in dotted decimal notation.
<vlan id> =
The VLAN Identifier to add to Ethernet frames that the
system routes to this gateway.
[<priority>] =
Set the IEEE 802.1p priority (0~7) to add to the traffic
that you send to this gateway.
Figure 249 RPVC Gateway Set Command Example
ras> shdsl rpvc gateway set 192.168.10.102 1 3