ZyXEL Communications SAM1316-22, User Manual

Page: 399 / 464

Chapter 59 DSL Commands
SAM1316-22 User’s Guide
399
59.3.4 Alarm Profile Map Command
Syntax:
ras> shdsl alarmprofile map <portlist> <profile> <span|stuc|stur|*>
where
Sets the SAM1316-22 to use an (already-configured) alarm profile with the
specified DSL ports.
The following example sets the SAM1316-22 to use the
SESalarm
alarm profile for
the STU-C end point with DSL port 5.
59.3.5 Alarm Profile Showmap Command
Syntax:
ras> shdsl alarmprofile showmap <portlist>
where
Displays which alarm profiles the SAM1316-22 is set to use for specific (or all) DSL
ports.
<portlist> =
You can specify a single DSL port <1>, all DSL ports
<*> or a list of DSL ports <1,3,5>. You can also include
a range of ports <1,5,6~8>.
<profile> =
The name of an alarm profile.
<span|stuc|stur
|*>
=
The type of alarm profile the specified alarm profile is
for the specified ports. The alarm profile can apply for
the whole span (
span
), the STU-C end point (
stuc
), the
STU-R end point (
stur
), or all STU-C and STU-R end
points (
*
).
Figure 234 Alarm Profile Map Command Example
ras> shdsl alarmprofile map 5 SESalarm stuc
<portlist> =
You can specify a single DSL port <1>, all DSL ports
<*> or a list of DSL ports <1,3,5>. You can also include
a range of ports <1,5,6~8>.