ZyXEL Communications SAM1316-22, User Manual

Page: 131 / 464

Chapter 16 G.bond
SAM1316-22 User’s Guide
131
16.2.1 G.bond Status Screen
Use this screen to look at the status of each port in each bond.
To open this screen, click Basic Setting > G.bond > G.bond Status.
Figure 62 Basic Setting > G.bond > G.bond Status
The following table describes the labels in this screen.
SID Select the length of the sequence ID used in this bond. The STU-C
specifies this value.
sid8: The sequence ID is 8 bits long.
sid12: The sequence ID is 12 bits long.
Port This field displays the DSL port number.
Member Select this to include this port in the bond. Clear this to remove this
port from the bond. Select All to include all of the ports in the bond.
Select None to include none of the ports in the bond.
Add Select this to add or update the bond.
Cancel Select this to clear the fields in this screen without saving any
changes.
Table 31 Basic Setting > G.bond (continued)
LABEL DESCRIPTION
Table 32 Basic Setting > G.bond > G.bond Status
LABEL DESCRIPTION
G.bond Setup Click G.bond Setup to bond one or more ports into a logical link (see
Section 16.2 on page 130 ).
Index This is the number of the bond.
Bond Name
(STUC/STUR) This is the name of the bond.
SID This is the length of the sequence ID used in this bond. The STU-C
specifies this value.