ZyXEL Communications SAM1316-22, User Manual

Page: 277 / 464

Chapter 46 Commands
SAM1316-22 User’s Guide
277
monitor vlimit <idx> <high> <low>
Sets the maximum (<high>)
or minimum (<low>) voltage
at the specified voltage
sensor. You can specify a
voltage with up to three digits
after a decimal point (0.941
for example).
Normal voltage at each
sensor: Idx: 1=1.8v, 2=3.3v,
3=15v
H/H
monitor tlimit <idx> <high> <low>
Sets the maximum (<high>)
or minimum (<low>)
temperature at the specified
temperature sensor. You can
specify a temperature with up
to three digits after a decimal
point (-50.025 for example).
Temperature sensor
locations: Idx: 1=DSL,
2=CPU, 3=HW monitor
H/H
user online
Displays online user info. M/~
user enable <name>
Turns on the specified user
name of multi-login. H/H
user disable <name>
Turns off the specified user
name of multi-login. H/H
user set <username>
<password>
<high|middle|low>
Creates or edits the password
and privilege level of the
specified user name. H/H
user delete <name>
Removes the specified user
name of multi-login. H/H
user show
Displays the authentication
mode, RADIUS server
settings and user info. M/L
user auth <local|radius|land
r>
Set authentication method. H/H
user server <ip> <port>
<secret>
[high|middle|low|d
eny]
Set remote authentication
server IP address and secret H/H
shdsl
show [portlist]
Displays the DSL settings. L/L
enable <portlist>
Turns on the specified DSL
ports. M/H
disable <portlist>
Turns off the specified DSL
ports. M/H
Table 103 Commands (continued)
CLASS COMMAND PARAMETERS DESCRIPTION P