ZyXEL Communications SAM1316-22, User Manual

Page: 283 / 464

Chapter 46 Commands
SAM1316-22 User’s Guide
283
igmpsnoop
bandwidth port
show
<portlist>
Show bandwidth control
setting for a port L/L
igmpsnoop
bandwidth set
<index> <start-
mcast-ip> <end-
mcast-ip>
<bandwidth>
Set bandwidth budget for a
range of multicast IP channels
specified in <index> field.
<index>: 1~96
<start-mcast-ip>: <ip>, start
multicast IP address
<end-mcast-ip>: <ip>, end
multicast IP address
M/H
igmpsnoop
bandwidth show
Show bandwidth budget for a
range of multicast IP channels L/L
igmpsnoop
igmpcount disable
<portlist>
Disable IGMP count limiting to
subscriber port H/H
igmpsnoop
igmpcount enable
<portlist>
Enable IGMP count limiting to
subscriber port H/H
igmpsnoop
igmpcount set
<portlist> <count>
Set IGMP count limiting
number to subscriber port H/H
igmpsnoop
igmpcount show
[portlist]
Display IGMP count limiting
setting status on the specified
slot M/L
igmpsnoop mvlan
set
<vid>
<portlist>:<F<T|U>
|X> [<portlist>:
<F<T|U>|X> ...]
[name]
Configures a MVLAN entry. H/H
igmpsnoop mvlan
show
<vlanlist>
Show multicast VLANs,
Include group information
M/L
igmpsnoop mvlan
disable
<vid>
Turns off a MVLAN entry. H/H
igmpsnoop mvlan
enable
<vid>
Turns on a MVLAN entry. H/H
igmpsnoop mvlan
delete
<vlanlist>
Removes a MVLAN entry. H/H
igmpsnoop mvlan
group set
<vid> <index>
<start_mcast_ip>
<end_mcast_ip>
Create a multicast to VLAN
translation entry.
up to 16 entries
<index>: 1~16,
Note: IP address in each
entry should be disjointed
H/H
igmpsnoop mvlan
group delete
<vid> <index>
Delete a multicast to VLAN
translation entry. H/H
Table 103 Commands (continued)
CLASS COMMAND PARAMETERS DESCRIPTION P