ZyXEL Communications SAM1316-22, User Manual

Page: 358 / 464

Chapter 53 PPPoE Intermediate Agent Commands
SAM1316-22 User’s Guide
358
This command adds a vendor-specific tag to PADI and PADR packets for PPPoE
clients in the selected VLAN(s) or for all VLAN. This tag contains information that a
PPPoE termination server can use to identify and authenticate a PPPoE client.
The following example activates the PPPoE agent setting for VLAN 100.
53.1.3 PPPoE Intermediate Agent Delete Command
Syntax:
ras> switch poeagent delete <vid>|all
where
This command deletes the PPPoE intermediate agent settings for the specified
VLAN or for all VLAN. You cannot delete the setting for VLAN 0.
53.1.4 PPPoE Intermediate Agent Disable Command
Syntax:
ras> switch poeagent disable <vid>|all
where
This command removes the vendor-specific tag from PADI and PADR packets for
PPPoE clients in the selected VLAN(s) or for all VLAN.
Figure 193 PPPoE Intermediate Agent Enable Command Example
ras> switch poeagent enable 100
ras> switch poeagent show
vid enable info
---- ------ -----------------------------
0 -
100 V
101 -
102 -
Note: vid 0 is the default agent.
<vid>|all =
The ID of the VLAN to which to apply the setting. Type
all
to apply the setting to all VLAN.
<vid>|all =
The ID of the VLAN to which to apply the setting. Type
all
to apply the setting to all VLAN.