ZyXEL Communications SAM1316-22, User Manual

Page: 138 / 464

Chapter 17 VLAN
SAM1316-22 User’s Guide
138
17.5 VLAN Port Setting Screen
Use this screen to specify port VLAN IDs and to set whether or not Ethernet ports
propagate VLAN information to other devices.
To open this screen, click Advanced Application, VLAN, VLAN Port Setting.
Figure 65 VLAN Port Setting
Name Enter a descriptive name for this VLAN group for identification
purposes. Spaces are not allowed.
VLAN ID Enter the VLAN ID for this static VLAN entry; the valid range is
between 1 and 4094.
Port The port numbers identify the SAM1316-22’s ports.
Control Select Fixed for the port to be a permanent member of this VLAN
group. Use the Select All button to include every port.
Select Forbidden if you want to prohibit the port from joining this
VLAN group. Use the Select All button to include every port.
Tagging Select TX Tagging if you want the port to tag all outgoing frames
transmitted with this VLAN ID. Use the All button to include every
port. Use the None button to clear all of the ports check boxes.
Add Click Add to save your settings. The VLAN then displays in the
summary table at the top of the screen.
Clicking Add saves your changes to the SAM1316-22’s volatile
memory. The SAM1316-22 loses these changes if it is turned off or
loses power, so use the Config Save link on the navigation panel to
save your changes to the non-volatile memory when you are done
configuring.
Cancel Click Cancel to begin configuring the fields afresh.
Table 34 Static VLAN Setting (continued)
LABEL DESCRIPTION