ZyXEL Communications SAM1316-22, User Manual

Page: 312 / 464

Chapter 49 DHCP Commands
SAM1316-22 User’s Guide
312
where
This command turns on the DHCP relay feature for the specified VLAN(s).
The following example enables DHCP relay on VLAN 1.
49.1.3 Disable Command
Syntax:
ras> switch dhcprelay disable <vid>|all
where
This command turns off the DHCP relay feature for the specified VLAN(s).
The following example turns off DHCP relay on VLAN 1.
49.1.4 Server Set Command
Syntax:
ras> switch dhcprelay server set <vid> <primary-server> [<secondary-
server>]
where
This command specifies the DHCP server(s) that serve the specified VLAN. The
primary server is required; the secondary server is optional. The SAM1316-22
< vid >
= ID of the VLAN to which this setting applies.
ras> switch dhcprelay enable 1
< vid >
= ID of the VLAN to which this setting applies.
ras> switch dhcprelay disable 1
<vid> =
The ID of the VLAN served by the specified DHCP
server(s).
<primary-
server>
=
The IP address of one DHCP server.
<secondary-
server>
=
The IP address of a second DHCP server.