ZyXEL Communications SAM1316-22, User Manual

Page: 419 / 464

Chapter 60 Virtual Channel Management
SAM1316-22 User’s Guide
419
and uses a subnet mask of 255.255.255.0. This includes the CPE device’s LAN IP
addresses and the IP addresses of the LAN computers.
60.7.11 RPVC ARP Agingtime Set Command
Syntax:
ras> shdsl rpvc arp agingtime set <sec>
where
This command configures how long the device stores the IP addresses of CPE
devices using 2684 routed mode in the Address Resolution Protocol table.
The following example sets the device to store the IP addresses 2684 routed mode
gateways in the Address Resolution Protocol table for 500 seconds.
60.7.12 RPVC ARP Agingtime Show Command
Syntax:
ras> shdsl rpvc arp agingtime show
This command displays how long the device stores the IP addresses of 2684
routed mode gateways in the Address Resolution Protocol table.
The following is an example.
Figure 257 RPVC Route Delete Command Example
ras> shdsl rpvc route delete 1 8 35 10.10.10.1/24
<sec> =
The number of seconds (10~10000) the device is to
keep the Address Resolution Protocol table’s entries of
IP addresses of 2684 routed mode gateways. Use 0 to
disable the aging time.
Figure 258 RPVC ARP Agingtime Command Example
ras> shdsl rpvc arp agingtime set 500
Figure 259 RPVC ARP Agingtime Show Command Example
ras> shdsl rpvc arp agingtime show
rpvc aging time (sec): 600