ZyXEL Communications SAM1316-22, User Manual

Page: 117 / 464

Chapter 14 xDSL Profiles Setup
SAM1316-22 User’s Guide
117
14.8.1 Alarm Profile Map Screen
Use this screen to look at and to assign the ports to which alarm profiles are
assigned. The SAM1316-22 loses these changes if it is turned off or loses power,
so use the Config Save link on the navigation panel to save your changes to the
non-volatile memory when you are done configuring.
Add Click Add to save your changes to the SAM1316-22’s volatile
memory. The SAM1316-22 loses these changes if it is turned off or
loses power, so use the Config Save link on the navigation panel to
save your changes to the non-volatile memory when you are done
configuring.
Cancel Click Cancel to start configuring the screen again.
Threshold Specify limits for the individual performance counters. The SAM1316-
22 sends an alarm trap and generates a syslog entry when one of
these thresholds is exceeded. A value of 0 disables the alarm
threshold.
Loop Attenuation The permitted attenuation (reduction of signal amplitude) of a port’s
connection.
SNR Margin The permitted signal to noise ratio margin.
ES The number of Errored Seconds (0~900) that are permitted to occur
within 15 minutes.
SES The number of Severely Errored Seconds (0~900) that are permitted
to occur within 15 minutes.
CRCanomalies The number of Cyclic Redundancy Checking anomalies that are
permitted to occur within 15 minutes.
LOWS The number of Loss Of Sync Word Seconds (0~900) that are
permitted to occur within 15 minutes.
UAS The number of UnAvailable Seconds (0~900) that are permitted to
occur within 15 minutes.
Index This is the index number of the alarm profile.
Name This is the name of the alarm profile.
Show Map
Select
Modify
Select a profile’s Select radio button and click Modify to edit the
profile
Delete Select a profile’s Select radio button and click Delete to remove the
profile
Table 26 Alarm Profile (continued)
LABEL DESCRIPTION