ZyXEL Communications SAM1316-22, User Manual

Page: 274 / 464

Chapter 46 Commands
SAM1316-22 User’s Guide
274
High privilege commands are only available to administrators with high privilege
access. High privilege commands include things like creating administrator
accounts, restarting the system and resetting the factory defaults. Administrators
with high privilege access can use all commands including the lower privilege
commands.
Administrators with middle privilege access can use middle or low privilege
commands.
Administrators with the low privilege level are restricted to using only low privilege
commands. Low privilege commands are read only.
46.3 Saving Your Configuration
Use the following command to save your configuration when you are done with a
configuration session.
ras> config save
Note: Do not turn off your SAM1316-22 while saving your configuration.
This command saves all system configurations to nonvolatile memory. You must
use this command to save any configuration changes that you make, otherwise
the SAM1316-22 returns to its default settings when it is restarted. Save your
changes after each configuration session.
Nonvolatile memory refers to the SAM1316-22’s storage that remains even if the
SAM1316-22’s power is turned off. Run-time (memory) is lost when the SAM1316-
22’s power is turned off.
46.4 Commands
The following table lists commands that you can use with the SAM1316-22.
The P column on the right indicates the administrator privilege level needed to use
the command (H for high, M for middle or L for low) and the equivalent in the web
configurator (H for high or L for low).
Table 103 Commands
CLASS COMMAND PARAMETERS DESCRIPTION P
sys
info show
Displays general system
information. L/L