ZyXEL Communications SAM1316-22, User Manual

Page: 345 / 464

Chapter 52 IGMP Commands
SAM1316-22 User’s Guide
345
52.4.2 IGMP Bandwidth Set Command
Syntax:
ras> switch igmpsnoop bandwidth set <index> <start-mcast-ip> <end-mcast-ip>
<bandwidth>
where
This command configures bandwidth allocation for the multicast channel(s). For
multicast channel(s) for which you have not configured bandwidth settings, the
default multicast bandwidth setting applies (see the
switch igmpsnoop
bandwidth default
command).
52.4.3 IGMP Bandwidth Delete Command
Syntax:
ras> switch igmpsnoop bandwidth delete <index>
where
This command removes the specified multicast bandwidth configuration profile.
52.5 IGMP Bandwidth Port Commands
Use the IGMP bandwidth port commands to set up bandwidth budgets for
multicast traffic on specific ports.
52.5.1 IGMP Bandwidth Port Disable Command
Syntax:
ras> switch igmpsnoop bandwidth port disable <portlist>
<index> =
1..96; a unique number for this setting.
<start-mcast-
ip>
=
224.0.0.0..239.255.255.255; the beginning of the
multicast range.
<end-mcast-ip> =
224.0.0.0..239.255.255.255; the end of the multicast
range. It must be greater than <start-mcast-ip>.
<bandwidth> =
1..100000, in units of kbps
<index> =
1..96; a unique number for this setting.