ZyXEL Communications SAM1316-22, User Manual

Page: 338 / 464

Chapter 51 MAC Commands
SAM1316-22 User’s Guide
338
where
This command disables the MAC filtering feature on the specified DSL port(s).
The following example turns off the MAC count filter on DSL port 4.
51.3.4 MAC Count Set Command
Syntax:
ras> switch mac count set <portlist> <count>
where
This command sets the limit for how many MAC addresses may be dynamically
learned on the specified DSL port(s).
The following example sets the MAC count filter to allow up to 50 MAC addresses
to be dynamically learned on DSL port 7.
<portlist> =
You can specify a single DSL port <1>, all DSL ports
<*> or a list of DSL ports <1,3,5>. You can also include
a range of ports <1,5,6~8>.
Figure 171 MAC Count Disable Command Example
ras> switch mac count disable 4
<portlist> =
You can specify a single DSL port <1>, all DSL ports
<*> or a list of DSL ports <1,3,5>. You can also include
a range of ports <1,5,6~8>.
<count> =
Set the limit for how many MAC addresses that a port
may dynamically learn. For example, if you are
configuring port 2 and you set this field to "5", then only
five devices with dynamically learned MAC addresses
may access port 2 at any one time. A sixth device would
have to wait until one of the five learned MAC addresses
ages out.
The valid range is from “1” to “128”.
Figure 172 MAC Count Set Command Example
ras> switch mac count set 7 50