ZyXEL Communications SAM1316-22, User Manual

Page: 425 / 464

Chapter 60 Virtual Channel Management
SAM1316-22 User’s Guide
425
60.9 Transparent LAN Service (TLS) Commands
Note: You can NOT configure PPPoA-to-PPPoE and TLS settings on the same PVC.
60.9.1 TLS PVC Delete Command
Syntax:
ras> shdsl tlspvc delete <portlist> <vpi> <vci>
where
This command clears TLS settings for the PVC.
60.9.2 TLS PVC Set Command
Syntax:
ras> shdsl tlspvc set <portlist> <vpi> <vci> <DS vcprofile[,US vcprofile]>
<pvid> <priority>
pppoe ac system
error
=
The number of times the access concentrator
experienced an error while performing the Host
request; for example, when resources are exhausted in
the access concentrator. This value does not include the
number of times the SAM1316-22 checks the AC name
field in the BRAS's reply PDU and finds a mismatch,
however.
pppoe generic
error
=
The number of other types of errors that occur in the
PPPoE session between the SAM1316-22 and the BRAS.
<portlist> =
The port number of the TLS PVC. You can specify a
single DSL port <1>, all DSL ports <*> or a list of DSL
ports <1,3,5>. You can also include a range of ports
<1,5,6~8>.
<vpi> =
The VPI of the TLS PVC.
<vci> =
The VCI of the TLS PVC.