ZyXEL Communications SAM1316-22, User Manual

Page: 108 / 464

Chapter 14 xDSL Profiles Setup
SAM1316-22 User’s Guide
108
with ports 1,2 or 3,4 but not with ports 2,3 or 4,5. A profile for an 8-wire group
can be used with ports 1,2,3,4 or 5,6,7,8 but not with ports 2,3,4,5 or 4,5,6,7.
After you assign the same DSL profile to all the ports in the set, you only have to
configure the one with the highest port number. Its settings apply to all the ports
in the set. For example, if you create an 8-wire group with ports 5, 6, 7, and 8, all
the settings for port 8 apply to ports 5, 6, and 7 (regardless of whatever settings
might already exist for ports 5, 6, and 7).
14.3 Port Profile Screen
To open this screen, click Basic Setting, xDSL Profiles Setup.
Figure 52 Port Profile
The following table describes the labels in this screen.
Table 24 Port Profile
LABEL DESCRIPTION
VC Profile Click VC Profile to open the VC Profile screen where you can
configure virtual channel profiles (see
Section 14.7 on page 114 ).
Alarm Profile Click Alarm Profile to open the Alarm Profile screen where you can
configure limits that trigger an alarm when exceeded (see
Section
14.8 on page 116 )
IGMP Filter Profile Click IGMP Filter Profile to open the IGMP Filter Profile screen
where you can configure IGMP multicast filter profiles (see Section
14.10 on page 119 ).
Index This is the port profile index number.