ZyXEL Communications SAM1316-22, User Manual

Page: 118 / 464

Chapter 14 xDSL Profiles Setup
SAM1316-22 User’s Guide
118
To open this screen, click Basic Setting, xDSL Profiles Setup, Alarm Profile,
Show Map.
Figure 57 Alarm Profile Map
The following table describes the labels in this screen.
14.9 IGMP Filtering
With the IGMP filtering feature, you can limit the multicast channel number of
IGMP groups a subscriber on a port can join. This allows you to control the
distribution of multicast services (such as content information distribution) based
on service plans and types of subscription.
You can set the device to filter the multicast group join reports on a per-port basis
by configuring an IGMP filtering profile and associating the profile to a port.
Table 27 Alarm Profile Map
LABEL DESCRIPTION
Alarm Profile
Name This field displays the name of the alarm profile displayed in this
screen.
Port This field displays the DSL port number.
Stuc This field displays whether or not the alarm profile is assigned to this
port as the alarm profile for the STU-C end point. It displays V if it is
assigned, and it displays - if it is not assigned. Click - to assign this
profile to the port for the STU-C end point.
Stur This field displays whether or not the alarm profile is assigned to this
port as the alarm profile for the STU-R end point. It displays V if it is
assigned, and it displays - if it is not assigned. Click - to assign this
profile to the port for the STU-R end point.
Span This field displays whether or not the alarm profile is assigned to this
port as the alarm profile for the whole span. It displays V if it is
assigned, and it displays - if it is not assigned. Click - to assign this
profile to the port for the whole span.
Close Click Close to close this screen.