ZyXEL Communications SAM1316-22, User Manual

Page: 139 / 464

Chapter 17 VLAN
SAM1316-22 User’s Guide
139
The following table describes the labels in this screen.
Table 35 VLAN Port Setting
LABEL DESCRIPTION
VLAN Status Click VLAN Status to see which of the SAM1316-22’s ports are
members of which VLANs (see
Section 17.3 on page 135 ).
Static VLAN Click Static VLAN to configure ports to dynamically join a VLAN
group or permanently assign ports to a VLAN group or prohibit ports
from joining a VLAN group (see
Section 17.4 on page 136 ).
Port The port numbers identify the SAM1316-22’s ports.
PVID Type the Port VLAN ID (PVID) from 1 to 4094. The SAM1316-22
assigns the PVID to untagged frames or priority frames (0 VID)
received on this port.
Priority Select an IEEE 802.1p priority to assign to untagged frames or
priority frames (0 VID) received on this port.
GVRP Select this check box if the SAM1316-22 should use GVRP to
automatically register and configure VLAN membership.
Acceptable Frame
Type Select All to have the port accept both tagged and untagged
incoming frames.
A
Select Tag Only to have the port only accept incoming frames that
have a VLAN tag.
Apply Click Apply to save your changes to the SAM1316-22’s volatile
memory. The SAM1316-22 loses these changes if it is turned off or
loses power, so use the Config Save link on the navigation panel to
save your changes to the non-volatile memory when you are done
configuring.