ZyXEL Communications SAM1316-22, User Manual

Page: 382 / 464

Chapter 58 SNMP
SAM1316-22 User’s Guide
382
58.1.3 Trusted Host Set Command
Syntax:
ras> sys snmp trusthost <ip>
where
Use this command to add the host IP address to the list of trusted hosts. If you
enter a trusted host, your SAM1316-22 will only respond to SNMP messages from
this address. If you leave the trusted host set to 0.0.0.0 (default), the SAM1316-
22 will respond to all SNMP messages it receives, regardless of source.
58.1.4 Trap Community Command
Syntax:
ras> sys snmp trapcommunity <community>
where
Enter this command with the community to set the password.
58.1.5 Trap Destination Set Command
Syntax:
ras> sys snmp trapdst set <index> <ip> [<port>]
where
Use this command specify the IP address (and port number) of a trap server to
which the SAM1316-22 sends SNMP traps. If you leave the trap destination set to
0.0.0.0 (default), the SAM1316-22 will not send any SNMP traps.
<ip> =
The IP address of a trusted host.
<community> =
The password sent with each trap to the SNMP
manager.
<index> =
The number of the trap server (1~4).
<ip> =
The IP address of the trap server.
[<port>] =
The port number upon which the trap server listens for
SNMP traps. The SAM1316-22 uses the default of 162 if
you do not specify a trap port.