ZyXEL Communications SAM1316-22, User Manual

Page: 105 / 464

Chapter 13 xDSL Port Setup
SAM1316-22 User’s Guide
105
To open this screen, click Basic Setting, xDSL Port Setup, PPVC Setup. Then,
click a PPVC’s member number to open the PPVC Setup Members screen.
Figure 51 PPVC Setup, Edit
The following table describes the labels in this screen.
Table 23 PPVC Setup, Edit
LABEL DESCRIPTION
Port This is the port for which you are viewing or configuring settings.
Index This field displays the number of the member PVC.
VPI/VCI This field displays the Virtual Path Identifier (VPI) and Virtual Circuit
Identifier (VCI). The VPI and VCI identify a channel on this port. The
subscriber’s device must create this PVC.
VC Profile This shows which VC profile this channel uses for downstream traffic
shaping. The VC profile for upstream policing also displays if the
channel is configured to use one.
Level This field displays the number of the member PVC’s priority queue.
Delete Click Delete to remove a member PVC from the PPVC.
Clicking Delete saves your changes to the SAM1316-22’s volatile
memory.
The SAM1316-22 loses these changes if it is turned off or loses power,
so use the Config Save link on the navigation panel to save your
changes to the non-volatile memory when you are done configuring.
Add Use this section of the screen to add or modify a member PVC.
VPI Type the Virtual Path Identifier for this member PVC.
VCI Type the Virtual Circuit Identifier for this member PPVC. This PVC
cannot overlap with any existing PVC’s on this port.
DS VC Profile Use the drop-down list box to select a VC profile to use for this
channel’s downstream traffic shaping.
US VC Profile Use the drop-down list box to select a VC profile to use for this
channel’s upstream traffic. The SAM1316-22 does not perform
upstream traffic policing if you do not specify an upstream VC profile.
Level Use the drop-down list box to select the priority queue (0 to 7) to add
to use for the PVC. 7 is the highest level.