SAM1316-22 User’s Guide
435
C
H A P T E R
6 2
Troubleshooting
This chapter covers potential problems and possible remedies. After each problem
description, some steps are provided to help you to diagnose and solve the
problem.
62.1 The SYS LED Does Not Turn On
The SYS LED does not turn on.
62.2 The ALM LED Is On
The ALM (alarm) LED lights when the SAM1316-22 is overheated or the voltage
readings are outside the tolerance levels.
Table 109
SYS LED Troubleshooting
STEP
CORRECTIVE ACTION
1
Make sure the SAM1316-22 is securely connected to the IES-1000.
2
Make sure the IES-1000 is properly connected to the power supply and the
power supply is operating normally. Make sure you are using the correct
power source. (See the IES-1000 User’s Guide.)
3
The LED itself or the unit may be faulty; contact your vendor.
Table 110
ALM LED Troubleshooting
STEP
CORRECTIVE ACTION
1
Use the statistics monitor command to verify the cause of the alarm. See step
2 if the unit is overheated and step 3 if the voltages are out of the allowed
ranges.
2
Ensure that the SAM1316-22 is installed in a well-ventilated area. Keep the
bottom, top and all sides clear of obstructions and away from the exhaust of
other equipment.
3
If the voltage levels are outside the allowed range, take a screen shot of the
statistics monitor command display and contact your vendor.
Summary of Contents for SAM1316-22
