ZyXEL Communications SAM1316-22, User Manual

Page: 410 / 464

Chapter 60 Virtual Channel Management
SAM1316-22 User’s Guide
410
The following example displays the PPVCs configured on DSL port 5.
60.6.2 PPVC Delete Command
Syntax:
ras> shdsl ppvc delete <portlist> <vpi> <vci>
where
This command removes a PPVC. Removing a PPVC also deletes all of the member
PVCs.
The following example removes a PPVC with VPI 8 and VCI 35 for port 5.
60.7 2684 Routed Mode Commands
Use the 2684 routed mode to have the SAM1316-22 add MAC address headers to
2684 routed mode traffic from a PVC that connects to a subscriber device that
uses 2684 routed mode. You can also specify the gateway to which the SAM1316-
22 sends the traffic and the VLAN ID tag to add. See RFC-2684 for details on
routed mode traffic carried over AAL type 5 over ATM.
Use the commands in the following order to set up a 2684 routed mode PVC.
1
Use the
shdsl rpvc gateway
commands to configure gateway settings.
Figure 245 PPVC Show Command Example
ras> shdsl ppvc show 5
port vpi vci encap pvid pri
================================
5 8 35 llc 25 6
<portlist> =
The port(s) of the PPVC.
You can specify a single DSL port <1>, all DSL ports
<*> or a list of DSL ports <1,3,5>. You can also include
a range of ports <1,5,6~8>.
<vpi> =
The VPI of the PPVC.
<vci> =
The VCI of the PPVC.
Figure 246 PPVC Delete Command Example
ras> shdsl ppvc delete 5 8 35