ZyXEL Communications SAM1316-22, User Manual

Page: 198 / 464

Chapter 28 2684 Routed Mode
SAM1316-22 User’s Guide
198
28.4 RPVC Arp Proxy Screen
Use this screen to view the Address Resolution Protocol table of IP addresses of
CPE devices using 2684 routed mode and configure how long the device is to store
them.
To open this screen, click Advanced Application, 2684 Routed Mode, RPVC
ARP Proxy.
Figure 96 RPVC ARP Proxy
VPI This field displays the Virtual Path Identifier (VPI) The VPI and VCI
identify a channel on this port.
VCI This field displays the Virtual Circuit Identifier (VCI). The VPI and VCI
identify a channel on this port.
IP This field displays the subscriber’s IP address.
NetMask This field displays the bit number of the subnet mask of the
subscriber’s LAN IP address.
Delete Select an entry’s Delete check box and click Delete to remove the
entry.
Clicking Delete saves your changes to the SAM1316-22’s volatile
memory.
The SAM1316-22 loses these changes if it is turned off or loses power,
so use the Config Save link on the navigation panel to save your
changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to start configuring the screen again.
Table 65 2684 Routed Domain (continued)
LABEL DESCRIPTION