ZyXEL Communications SAM1316-22, User Manual

Page: 360 / 464

Chapter 53 PPPoE Intermediate Agent Commands
SAM1316-22 User’s Guide
360
This command creates a PPPoE agent information entry for the VLAN. After you
have created an entry for a VLAN, you can configure the line information settings.
The following example creates an entry for VLAN 10.
53.1.7 PPPoE Intermediate Agent Show Command
Syntax:
ras> switch poeagent show
[
<vlanlist>]
where
This command displays PPPoE intermediate agent settings for the specified VLAN
or for all VLAN. The following example shows the PPPoE intermediate agent
settings for all VLAN.
Figure 195 PPPoE Intermediate Agent Set Command Example
ras> switch poeagent set 10
ras> switch poeagent show
vid enable info
---- ------ -----------------------------
0 -
10 -
100 V testing
101 -
102 -
Note: vid 0 is the default agent.
<vlanlist> =
You can specify a single VID: <1>, all VIDs: <*>, a list
of VIDs: <1,3>, you can also include a range of VIDs:
<1,5,6~10>.
Figure 196 PPPoE Intermediate Agent Show Command Example
ras> switch poeagent show
vid enable info
---- ------ -----------------------------
0 -
10 -
100 V testing
101 -
102 -
Note: vid 0 is the default agent.