ZyXEL Communications SAM1316-22, User Manual

Page: 407 / 464

Chapter 60 Virtual Channel Management
SAM1316-22 User’s Guide
407
This command creates a PPVC.
The following example creates a PPVC with VPI 8 and VCI 35 for port 5. The PPVC
uses llc encapsulation and default VID 25. Any frames received without an IEEE
802.1p priority tag will be assigned a priority of 3. The SAM1316-22 uses this PVC
channel internally. This PVC is not needed on the subscriber’s device.
60.4.2 PPVC Member Set Command
Syntax:
ras> shdsl ppvc member set <portlist> <vpi> <vci> <member vpi> <member vci>
<DS vcprofile[,US vcprofile]> <level>
where
This command adds a member PVC to a PPVC. You must create the PPVC before
you use this command to add a member.
Figure 241 PPVC Set Command Example
ras> shdsl ppvc set 5 8 35 llc 25 3
<portlist> =
The port(s) of the PPVC.
You can specify a single DSL port <1>, all DSL ports
<*> or a list of DSL ports <1,3,5>. You can also include
a range of ports <1,5,6~8>.
<vpi> =
The VPI of the PPVC.
<vci> =
The VCI of the PPVC. This PVC channel is for internal
use. The subscriber does not need to create this PVC.
<member vpi> =
The VPI of the individual PVC that you are adding to the
PPVC. The VPI setting can be 0 to 255.
<member vci> =
The VCI of the individual PVC that you are adding to the
PPVC. The VCI setting can be 32 to 65535 with a VPI of
0 or 1 to 65535 if the VPI is not 0. The subscriber’s
device must create this PVC.
DS vcprofile =
Assign a VC profile to use for this channel’s downstream
traffic shaping.
[,US
vcprofile]>
=
Assign a VC profile to use for policing this channel’s
upstream traffic. The SAM1316-22 does not perform
upstream traffic policing if you do not specify an
upstream VC profile.
<level> =
The priority queue (0~7) to use for this PVCs traffic. 7 is
the highest priority.