ZyXEL Communications SAM1316-22, User Manual

Page: 136 / 464

Chapter 17 VLAN
SAM1316-22 User’s Guide
136
17.4 Static VLAN Setting Screen
You can assign a port to be a member of a VLAN group or prohibit a port from
joining a VLAN group in this screen. This is an IEEE 802.1Q VLAN.
The first table displays the names of the fields. The subsequent tables
show the settings of the VLANs.
Index This is the VLAN index number.
Name / VID The name identifies an individual VLAN. The vid is the PVID, the Port
VLAN ID assigned to untagged frames or priority-tagged frames
received on this port.
1~16, enet1,
enet2 These columns display the VLAN’s settings for each port. A tagged
port is marked as T, an untagged port is marked as U and ports not
participating in a VLAN are marked as “–“.
Elapsed Time This field shows how long it has been since a normal VLAN was
registered or a static VLAN was set up.
Status This field shows that this VLAN was added to the SAM1316-22
statically, that is, added as a permanent entry.
Poll Interval(s)
Set Interval
The text box displays how often (in seconds) this screen refreshes.
You may change the refresh interval by typing a new number in the
text box and then clicking Set Interval.
Stop Click Stop to halt polling statistics.
Previous Page
Next Page
Click one of these buttons to show the preceding/following screen if
the information cannot be displayed in one screen.
Table 33 VLAN Status (continued)
LABEL DESCRIPTION