manualshive.com logo in svg

YOKOGAWA 701210, User Manual, Page: 93 / 747

Share
Download
YOKOGAWA 701210 User Manual Download Page 93

2-55

IM 701210-05E

Explanation of Functions

2

Cursor Measurement <Section 11.5>

The following cursors are available for analyzing the values of each waveform data.

H (Horizontal) Cursors

Two broken lines (H cursors) are displayed on the X-axis (horizontal axis).  The voltage

of each H cursor and the voltage difference between the H cursors are measured.

V (Vertical) Cursors

Two broken lines (V cursors) are displayed on the Y-axis (vertical axis).  The time from

the trigger position to each V cursor and the time difference between the V cursors are

measured.  The voltage value of the signal at each cursor position, and the voltage

difference between the cursors are also measured.

H&V Cursors

H cursors and V cursors are displayed simultaneously.

Marker Cursors

Four markers are displayed on the specified waveform.  The voltage and the time from

the trigger position of each marker as well as the voltage difference and time difference

between markers are measured.

Degree Cursors

Measures the angle between two angle cursors with respect to a reference angle

corresponding to the width between the zero point and the end point, which are

measurement references.

Marker 1

Marker 3

V cursor

H cursor

Cursor2

Cursor1

Cursor measurement value 

(when the extra window is not displayed)

Marker 2

Marker 4

Reference cursor 2

Reference cursor 1

Angle cursor

Marker cursor

Cursor1

Cursor2

Cursor1

Cursor2

Cursor measurement value 

(when the extra window is displayed)

Reference

width

Unit

2.7 Waveform Analysis/Search

Summary of Contents for 701210












































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments