YOKOGAWA 701210 User Manual Download Page 280

Page: 280 / 747

7-14

IM 701210-05E

Setting the Sub Waveform

• Record Length of the Sub Waveform

Fixed to 10 kW.

• Time/div Setting of the Sub Waveform

The maximum sample rate is 10 MS/s.

• Acquisition Mode of the Sub Waveform

Fixed to Normal.

• Trigger Setting of the Sub Waveform

When the dual capture mode is turned ON, the trigger setting is no longer applied to

the main waveform, but applied to the sub waveform.

In addition, the trigger output during acquisition in dual capture mode becomes the

trigger output of the sub waveform.

• Sub Waveform Display: Window

Select the from the following four types.

OFF:

Does not display the sub waveform.

Right : Displays the sub waveform at the lower right section of the screen at 1/4 size.

Left:

Displays the sub waveform at the lower left section of the screen at 1/4 size.

Full:

Displays the sub waveform on a full screen.

• Waveform Display Position: Window Pos

Set the display position of the sub waveform.

• Sub Waveform Zoom Ratio: Window Mag

The sub waveform is displayed at the zoom rate specified by Window Mag around the

waveform display position specified by Window Pos.

• Display Format of Sub Waveforms

Set the display format of sub waveforms.

Main:

Same format as the main window

Single:

1 window

Dual:

2 windows

Triad:

3 windows

Quad:

4 window

Octal:

8 windows

Hexadecimal: 16 windows

Selecting the Displayed Trace: Allocation

The traces that are turned ON under Allocation are displayed.

• Displaying the Acquired Waveform: Capture Num

You can specify the number of the acquired waveform to be displayed in the sub

waveform window.

The time that is shown below the number is the trigger time of the waveform.

When in Auto Mode

Current, –1, –2, ....

where current is the newest waveform, –1 is the waveform previous to the newest

waveform, and –2 is the waveform that is 2 triggers before the newest waveform.

The acquired waveform can be displayed only when the waveform acquisition is

stopped.

When in Log Mode

Current, 1, 2, ....

where current is the newest waveform, 1 is the oldest waveform, and 2 is the second

oldest waveform.

The acquired waveform can be displayed even when the waveform acquisition is in

progress.

7.6 Using the Dual Capture Function

Summary of Contents for 701210












































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 701210

Reviews:

YOKOGAWA 701210, User Manual, Page: 280 / 747

Search results

Summary of Contents for 701210

Reviews: