YOKOGAWA 701210 User Manual Download Page 562

Page: 562 / 747

16-10

IM 701210-06E

• Saving/Loading Waveform Data and Setup Data

12.

Press

FILE

13.

Press the

Utility

soft key. The File List window appears.

14.

Use the

jog shuttle

to select [Network] in the File List window.

15.

The succeeding procedure is the same as the procedure described in section

13.8, “Saving/Loading the Setup Data” and section 13.7, “Saving/Loading the

Waveform Data.” In addition, waveform data with a voice memo attached can

be saved/loaded. For details, see section 7.9, “Using the Voice Memo

Function.”

16.3 Saving/Loading Screen Images, Waveforms, and Setup Data to a Network Drive (FTP Client Function)

Summary of Contents for 701210












































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 701210

Reviews:

YOKOGAWA 701210, User Manual, Page: 562 / 747

Search results

Summary of Contents for 701210

Reviews: